Critical_Level2
Explorer Addict
- Joined
- November 29, 2001
- Messages
- 1,039
- Reaction score
- 0
- City, State
- Ridley Park, PA
- Year, Model & Trim Level
- 1999 XLS R.I.P.
I am having a problem with the rear part of my driver side front door window molding. It was replaced once last year under warranty and it is loose again. The molding is only held on the door tightly when the window is all the way up. The passenger side is very tight, even with the window all the way down. Is this normal and has anyone had this problem before. Any info on this problem would be greatly appreciated, before I go back and have a third one put on (luckily the truck has an extended warranty).
