Bubble18-30
Active Member
- Joined
- March 12, 2009
- Messages
- 93
- Reaction score
- 0
- City, State
- Leeds, Yorkshire
- Year, Model & Trim Level
- 1998 V6
Hi Guys.
I've recently posted this same question in the Uk Explorer Forum Section but i think we're all drawing a bit of a blank on this one!
My rear Driveshaft (Transfer Case to Rear Diff) has a Slip Yoke (What the Haynes Manual calls it!) about 1/4 way down from the Transfer Case end with a rubber gator on it. When i push it up and down at the yoke there is a clunk inside and about 4-5mm of play at the join...
Is the yoke meant to have any play? (Other than sliding in and out)
Your help would be very much appreciated!
I've recently posted this same question in the Uk Explorer Forum Section but i think we're all drawing a bit of a blank on this one!
My rear Driveshaft (Transfer Case to Rear Diff) has a Slip Yoke (What the Haynes Manual calls it!) about 1/4 way down from the Transfer Case end with a rubber gator on it. When i push it up and down at the yoke there is a clunk inside and about 4-5mm of play at the join...
Is the yoke meant to have any play? (Other than sliding in and out)
Your help would be very much appreciated!