easy question.

[DJ]

Ok, so here's the deal. My seat is stuck leaning at a 45 degree angle. I originally thought it was the seat recliner mechanism, so I replaced it. Didn't help. So now im thinking its a bent frame on the seat.

So here's my questions:
1. What is your guys thoughts on the problem?
2. How do I remove the drivers seat. (No electronics)

Thanks.

 

[deweyville65]

Simply unbolt it from the floor. Slide seat back to access the front bolts. Slide seat forward to access the rear bolts. Unplug the seat belt wiring.

 

[DJ]

Lol, well, that's easy. Does it sound like that is the next logical step?

 

[deweyville65]

You can always do what I have done in the past, get longer bolts and block up the rear of the seat frame. Don't get too carried away though. I never went more than an inch. Sometimes that makes a big difference.

 

[DJ]

Lol. That's not gonna work. Actually got some time to look today. Here is what I found, and u don't think blocking it up is gonna help:

 

[deweyville65]

Looks like it is time to get a new seat