Edelbrock exhaust tip opinion...

[Foo]

http://www.jegs.com/cgi-bin/ncommerce3/ProductDisplay?prrfnbr=1294&prmenbr=361


I'm getting a super 40 flowmaster 2.5' in and out with custom bent pipes soon and was wondering how you guys thought this tip looked (Inlet: 2-1/2'' Body: Angle Cut Round, Chrome) and if it would work if I ended up getting clamped couldn't get it welded on?

I just want something that doesn't look ricey and matches the bumper

 

[EBInterceptor]

Where are you having your exhaust exit? Straight back or out the side behind the tire? It's not a bad looking tip, but others may look better depending on application.

 

[Foo]

I haven't completey decided yet, but I was thinking of just having it exit like the stock out the back on an angle.

 

[EBInterceptor]

I found some nice Dynomax dual out tips with 2 1/2" inlet.. Kind of pricey at around $90, but stainless steel and I think it would look sweet on an X. I was considering get that and sweeping it out the side like the Gibson dual sport. I had a Pilot, I believe, tip which was around $35 with a 2 1/2" inlet and dual 3" outlets....can find them at http://www.autobarn.com which you might want to look at...It could be done tastefully and give a lower rumble to your exhaust (I had mine on a 2 1/2" straight pipe on my old X).

 

[Foo]

Nah $90 is more than I spent on the muffler and I want a single out

 

[EBInterceptor]

The price turned me off to the idea too. If that's the one you want, go for it. It should look good as long as you don't put a coffee can on the back

 

[Foo]

Originally posted by EBInterceptor
The price turned me off to the idea too. If that's the one you want, go for it. It should look good as long as you don't put a coffee can on the back

Tryign to avoid at all costs!

 

[TAS98xlt]

There are some really nice looking tips in different sizes here: Bullet Tips. You'll need to have these welded on though.