steveatthebeach
Active Member
- Joined
- February 15, 2006
- Messages
- 80
- Reaction score
- 27
- City, State
- Virginia Beach, Va
- Year, Model & Trim Level
- 2014 Explorer XLT
- Callsign
- K4IQX
I've looked through the other threads and saw similar problem, but since I wasn't sure if mine was the possibly the same issue, I thought I would post another thread about it.
Slower speeds no issues, Get on the interstate, try to accelerate normally and the engine stutters. Put the gas pedal through the floor, no problems! Replaced the fuel pump back in September last year along with the fuel filter. I'm not getting any codes on anything when I plug the OBD II scanner in tho.
Saw a few threads about the O2 sensor, some about the MAF, but if these were the problem, wouldn't it show up on the scanner?
Thanks in advance for any help you could throw my way.
Slower speeds no issues, Get on the interstate, try to accelerate normally and the engine stutters. Put the gas pedal through the floor, no problems! Replaced the fuel pump back in September last year along with the fuel filter. I'm not getting any codes on anything when I plug the OBD II scanner in tho.
Saw a few threads about the O2 sensor, some about the MAF, but if these were the problem, wouldn't it show up on the scanner?
Thanks in advance for any help you could throw my way.