FORD Transmission DTC - Diagnostic Trouble Codes. OBDII P0700-P0790.

[dallasmef]

I have a 5R55E transmission, but these may apply to other Ford transmissions.
I hope these are helpful.

Ford OBDII Diagnostic Trouble Codes - P0700-P0799 - Transmission


P0700 Transmission Control System Malfunction
P0701 Transmission Control System Range/Performance
P0702 Transmission Control System Electrical
P0703 Torque Converter/Brake Switch B Circuit Malfunction
P0704 Clutch Switch Input Circuit Malfunction
P0705 Transmission Range Sensor Circuit malfunction (PRNDL Input)
P0706 Transmission Range Sensor Circuit Range/Performance
P0707 Transmission Range Sensor Circuit Low Input
P0708 Transmission Range Sensor Circuit High Input
P0709 Transmission Range Sensor Circuit Intermittent
P0710 Transmission Fluid Temperature Sensor Circuit Malfunction
P0711 Transmission Fluid Temperature Sensor Circuit Range/Performance
P0712 Transmission Fluid Temperature Sensor Circuit Low Input
P0713 Transmission Fluid Temperature Sensor Circuit High Input
P0714 Transmission Fluid Temperature Sensor Circuit Intermittent
P0715 Input/Turbine Speed Sensor Circuit Malfunction
P0716 Input/Turbine Speed Sensor Circuit Range/Performance
P0717 Input/Turbine Speed Sensor Circuit No Signal
P0718 Input/Turbine Speed Sensor Circuit Intermittent
P0719 Torque Converter/Brake Switch B Circuit Low
P0720 Output Speed Sensor Circuit Malfunction
P0721 Output Speed Sensor Range/Performance
P0722 Output Speed Sensor No Signal
P0723 Output Speed Sensor Intermittent
P0724 Torque Converter/Brake Switch B Circuit High
P0725 Engine Speed input Circuit Malfunction
P0726 Engine Speed Input Circuit Range/Performance
P0727 Engine Speed Input Circuit No Signal
P0728 Engine Speed Input Circuit Intermittent
P0730 Incorrect Gear Ratio
P0731 Gear I Incorrect ratio
P0732 Gear 2 Incorrect ratio
P0733 Gear 3 Incorrect ratio
P0734 Gear 4 Incorrect ratio
P0735 Gear 5 Incorrect ratio
P0736 Reverse incorrect gear ratio
P0740 Torque Converter Clutch Circuit Malfunction
P0741 Torque Converter Clutch Circuit Performance or Stuck Off
P0742 Torque Converter Clutch Circuit Stock On
P0743 Torque Converter Clutch Circuit Electrical
P0744 Torque Converter Clutch Circuit Intermittent
P0745 Pressure Control Solenoid Malfunction
P0746 Pressure Control Solenoid Performance or Stuck Off
P0747 Pressure Control Solenoid Stuck On
P0748 Pressure Control Solenoid Electrical
P0749 Pressure Control Solenoid Intermittent
P0750 Shift Solenoid A Malfunction
P0751 Shift Solenoid A Performance or Stuck Off
P0752 Shift Solenoid A Stuck On
P0753 Shift Solenoid A Electrical
P0754 Shift Solenoid A Intermittent
P0755 Shift Solenoid B Malfunction
P0756 Shift Solenoid B Performance or Stock Off
P0757 Shift Solenoid B Stuck On
P0758 Shift Solenoid B Electrical
P0759 Shift Solenoid B Intermittent
P0760 Shift Solenoid C Malfunction
P0761 Shift Solenoid C Performance or Stuck Off
P0762 Shift Solenoid C Stuck On
P0763 Shift Solenoid C Electrical
P0764 Shift Solenoid C Intermittent
P0765 Shift Solenoid D Malfunction
P0766 Shift Solenoid D Performance or Stuck Off
P0767 Shift Solenoid D Stuck On
P0768 Shift Solenoid D Electrical
P0769 Shift Solenoid D Intermittent
P0770 Shift Solenoid E Malfunction
P0771 Shift Solenoid E Performance or Stuck Off
P0772 Shift Solenoid E Stuck On
P0773 Shift Solenoid E Electrical
P0774 Shift Solenoid E Intermittent
P0780 Shift Malfunction
P0781 1-2 Shift Malfunction
P0782 2-3 Shift Malfunction
P0783 3-4 Shift Malfunction
P0784 4-5 Shift Malfunction
P0785 Shift/Timing Solenoid Malfunction
P0786 Shift/Timing Solenoid Range/Performance
P0787 Shift/Timing Solenoid Low
P0788 Shift/Timing Solenoid High
P0789 Shift/Timing Solenoid Intermittent
P0790 Normal/Performance Switch Circuit Malfunction

 

[BrooklynBay]

Thanks for making this thread! I've added OBDII P0700-P0790 to the title, and made it a sticky thread.

 

[dallasmef]

 

[krawhitham]

Will an Actron CP9175 read these codes?

Vehicle
98 Explorer 4 Wheel Drive, 6 Cyl. 4.0L SOHC -5R55E+OD Transmission

It has a flashing O/D light but the only code the Actron CP9175 found was p0430

 

[BrooklynBay]

Welcome to this forum! After reading the information from your link, I would say that this scanner can't read these codes. You will have to go with one of the higher models.

 

[akdan747]

can you recommend a scanner for the DIY. I really don't want to spend the 1.5k on the tool truck for a scanner i will use 3 times a year.

 

[kidwood]

i have a 99 explorer that wont budge its an automatic and when i move the shifter nothing happens no noise no jolt no rpm change and above all no trouble codes does anyone have any ideas i would appreciate any input thanks

 

[bobdabldr]

Scan shows all 4 codes P0750, P0755, P0760, P0765

I started my 97 4.0 (2000 engine) 4 WD after letting it sit for a week in the cold,
the O/D off light started flashing and the check engine light came on. I had the codes pulled at AZ and all 4 codes came up. I can't imagine that 4 separate solenoids failed at once. Is it likely an electrical issue?
Since it started the trans doesn't shift out of 3rd gear unless I manually drop it to lower gears. And it never goes into OD.
Any help would be greatly appreciated.
Thanks, Bob

 

[harleyrider66]

DTC for 5r55e trans

Thanks to dallasmef for posting DTC for trans. My daughter's '01 Sport Trac is experiencing some trans issues. DTC 768. Have obd tool, Just did not know what code meant. Thanks.

 

[neilpridenz]

This is just a thought - I am toying with the idea of building a computer based enternainment system for my explorer, hooking up GPS into it for map display, having mobile internet etc etc.

Many of the ready - built programs you can get to do this are able to hook into the on-board vehicle diagnostics presumably via the ODBII port.

I have been wondering if I could take an input from this to provide a set of 'virtual' gauges for engine temp, RPM, road speed including transmission fluid temp and pressure. Is it likely that these values can be read straight off the vehicles diagnostics if I can interface to them?

Might not turn out to be be practical but I do like the idea! Any ODBII experts lurking on the forum?

 

[BrooklynBay]

Check WWW.Scanguage.Com.

 

[bobdabldr]

loose connector

I was right! (go figure) The connector had simply fallen loose. I replaced it, cleared the computer and it's been ok ever since!

 

[BrooklynBay]

Thanks for letting us know. Sometimes multiple codes are caused by a bad connection on the bulkhead connector.