Front Wheel Hub and Bearing 2008 sport trac

[kentbsmith]

I cannot get the front hub and bearing off my 2008 sport tract
I have tried to us a puller but it will not budge
Any suggestions on how I can get this part removed??

 

[FLOffroad]

I would imagine you've tried this, but:
Penetrating lubricant (WD40, Liquid Wrench, etc.)?

 

[Tech By Trade]

Soak it in weasel piss and leave it over night. Should pop right off in the morning, at least mine did.

 

[calahan#2211]

2wd or 4wd? The bearing and hub on these are a cartridge sealed single piece unit. There are three bolts running from the spindle into the back of the assembly. Remove the nuts and bolts and it should come apart pretty easily. If it is a 4wd then you need to get a puller for IRS/CV axles. Remove the center nut first and press the axle out before removing the bolts and hub assembly...