Specs on Amp
Model G250a2
Description Punch 250a2
RMS Power (4 ohms) 62.5W x 2
RMS Power (2 ohms) 125W x 2
RMS Power (Bridged/Mono) 250W x 1
THD Distortion <0.05%
Frequency Response 20Hz-20kHz +/- 0.5dB
Signal-to-Noise >100dB
Input Sensitivity 250mV-4V (RCA) 650mV-11V (hi-level)
Bridgeable Yes
Punch Bass Variable 0dB to +18dB @ 45Hz
Crossover Frequency 50Hz - 210Hz HP/Full/LP
Crossover Slope 12dB/octave Butterworth
Height 2.62" (6.65cm)
Width 9.60" (24.38cm)
Length 11.27" (28.62cm
Also amp is only about a month and a half old. Trust me there is plenty of power for the subs, I used to have an MTX running on them that would overheat and cut off for brief periods of time, never happened with this one, and I run my stereo loud all the time.