rileyrs
Well-Known Member
- Joined
- January 22, 2009
- Messages
- 885
- Reaction score
- 1
- Year, Model & Trim Level
- 2002 ranger
trying to change the fuel filter on the ranger, the inlet side of this filter has two hoses going in.
i have the same 3/8th tool as i used in the explorer and it does fit the fuel lines.
but heres the problem
the ranger doesnt have the same safety clips as the explorers, just really big ends to the fuel lines, and there isnt enough room between one of them and the filter to get the tool in. so how am i suposed to remove that one?
i got the other two lines off, but this one only has 1/4 inch or less between the big end of the line and the filter, and there is no way the tool is going in there.
anyone have any tips?
i have the same 3/8th tool as i used in the explorer and it does fit the fuel lines.
but heres the problem
the ranger doesnt have the same safety clips as the explorers, just really big ends to the fuel lines, and there isnt enough room between one of them and the filter to get the tool in. so how am i suposed to remove that one?
i got the other two lines off, but this one only has 1/4 inch or less between the big end of the line and the filter, and there is no way the tool is going in there.
anyone have any tips?