95exploresport
Active Member
- Joined
- October 11, 2011
- Messages
- 75
- Reaction score
- 0
- City, State
- Colorado Springs, Colorado
- Year, Model & Trim Level
- wcarroll28@q.com
http://www.explorerforum.com/forums/showthread.php?t=242731
http://www.explorerforum.com/forums/showthread.php?t=142801
http://www.explorerforum.com/Singleton/web/pages/fuelpr.html
These post has been helpful as I had the same problem of no power going up hills and it falls flat when I floor it. I just checked the fuel pressure and it reads 30 psi ignition on not running, 38 psi engine running. Now the question I have is what should the pressure be? I have read mixed answers on this ranging from 30 psi to 75 psi in the threads above so I need a expert to let me know. *Engine specs below.
Also is my FPR in the tank or on the fuel rail.
1995 Explorer sport 4.0 liter 92,587 miles
http://www.explorerforum.com/forums/showthread.php?t=142801
http://www.explorerforum.com/Singleton/web/pages/fuelpr.html
These post has been helpful as I had the same problem of no power going up hills and it falls flat when I floor it. I just checked the fuel pressure and it reads 30 psi ignition on not running, 38 psi engine running. Now the question I have is what should the pressure be? I have read mixed answers on this ranging from 30 psi to 75 psi in the threads above so I need a expert to let me know. *Engine specs below.
Also is my FPR in the tank or on the fuel rail.
1995 Explorer sport 4.0 liter 92,587 miles