jremington59
Explorer Addict
- Joined
- October 28, 2009
- Messages
- 1,933
- Reaction score
- 9
- City, State
- Watertown, NY
- Year, Model & Trim Level
- 1997, 99 and 2000 5.0's
Mine came yesterday and the first thing I noticed was that the hangers were welded to the clamp and they were both pointed to the side. Both pointing the same way. All of my exhausts have the hangers pointing towards the back, one on each side of the muffler. So they preceded to argue with me which really pissed me off. After sending them a load of pics of the stock exhausts they "partially" admitted they were wrong by saying "yours must be different than most. So I made a temp hanger and installed the muffler, but when I installed the tailpipe it rubs the rear sway bar link, the shock and the back of the exhaust is touching the plastic side fender. It's about a foot lower than the heat shield and the bends all wrong. Thank god they were closed by then.
Does anyone else have one of these on their 2nd Gen V8's? I'm really hoping they mixed mine up with someone elses and they aren't this dumb. Cause that's the best word I have for this.
Does anyone else have one of these on their 2nd Gen V8's? I'm really hoping they mixed mine up with someone elses and they aren't this dumb. Cause that's the best word I have for this.