red94ltng
New Member
- Joined
- April 17, 2011
- Messages
- 4
- Reaction score
- 0
- City, State
- Cheyenne,Wy
- Year, Model & Trim Level
- 1994 xlt
Okay first of hello everyone my first post on this site figured i might see if anyone has a quick answer to my problem before i dig into it and replace a bunch of stuff i dont need to bought a 1994 explorer last year it starts and idles fine sitting in neutral or park acc past 2k makes it want to choke out and same with it in gear got it home at 35mph or so and left it for a project when it would get a little warmer i have pulled the codes a while back mostly 02 sensor codes
well decided today it was starting to get warm and time to mess with it there are a few vac lines missing on drivers side next to throttle body and exhaust is of course so rusty i cannot take it apart to check cats mass air looks clean and no restriction i can see in intake area up to intake of course have not replace plugs or fuel filter yet is there a port to check the fuel pressure on these if so where or do i bother just looking for a place to start any info would be helpful maybe even a vac line diagram for the drivers side next to tb thanks ahead of time
Aaron
well decided today it was starting to get warm and time to mess with it there are a few vac lines missing on drivers side next to throttle body and exhaust is of course so rusty i cannot take it apart to check cats mass air looks clean and no restriction i can see in intake area up to intake of course have not replace plugs or fuel filter yet is there a port to check the fuel pressure on these if so where or do i bother just looking for a place to start any info would be helpful maybe even a vac line diagram for the drivers side next to tb thanks ahead of time
Aaron