Goodyear Mt/R 31x10.5x15 will these fit a 95 explorer 4 dr?

[95EXP4.0]

I'm just wondering if the goodyear mt/r 31x10.5x15 will fit my 95 4 dr explorer 4wd with stock ride height no mods???

 

[95EXP4.0]

Originally posted by 95EXP4.0
I'm just wondering if the goodyear mt/r 31x10.5x15 will fit my 95 4 dr explorer 4wd with stock ride height no mods???

One more thing I forgot to add.......how much will this effect my speedometer accuracy by also?

 

[Alec]

31x10.5s often fit with no mods, though many have minor rubbing issues. For best results with 31s, I recommend a 2" lift. But many members have 31s with no lift. Your speedo will most likely be about 5 mph slow at 70 mph, but may be on the low side of factory spec since many come from the factory reading way too high.

 

[95EXP4.0]

I was also reading about it somewhere.....but can't you get it calibrated at the dealer to match your tire size I think I read an article on here about "pcm"? I'm not sure if that's right??

 

[95EXP4.0]

Also how much do 2" lift kits start off at? I seen this one on Ebay for sale dunno how safe it is:

http://cgi.aol.ebay.com/ebaymotors/ws/ebayISAPI.dll?ViewItem&item=1829227627&r=0&t=0

 

[mikefox]

The ebay listing you posted is only for the 91-94 Explorers with coil spring front ends.

I think what Alec might be referring to is a 2" body lift or even a torsion bar twist and longer shackles (Warrior). Either of these 2 ideas would give you the 2" you possibly would need.

 

[Alec]

Yes, the 2" lift I was referring to is using the torsion bars in front and the warrior brand shackles in the rear. As for the speedo, you don't have to mess with the computer. On your 95, the speedo is driven by a gear in the tranny or tcase. You just need to get a different one.

These subjects can all be found through the search engine.