Hellllllp please

[tylervg]

Hello, Im new to the ford explorer and started off with a bang. I bought 2 trucks, one is a 2001 sport, and the other is a 2003 sport. The 01 was hit in over from the 03 where the bags were good. There are no loose connections or anything, is there a reset button I dont know about?? any hethe front, and the 03 was a rollover, So i took the body off the 03 and put the 01 body on it. Well, I had to change the dash, and wiring harness because they all hooked up differnely. Now i have it almost together, but a few problems. First my air bag like is blinking a 2-4 combination. The bags in this dash and computer are good. they went ini the 01 but i changed everything lp would be super appreciated. Next problem, is my compass and temperature us on the headliner, the compass is fine, but the temperature reads -40 and i dont understand why. any help would be great. My last problem is how to figure out the original keylesss entry code so i can reset it. Please help im sure some of you know these trucks pretty well. I will post pics of my process soon, and also i have a complete parts truck with 373 gears, that i will be parting out shortly, cant wait for some replies

 

[ExplorerDMB]

I would like to see some pictures...

The Keyless entry code I believe is on the computer somewhere (atleast thats what I have read). The 2-4 combo is a code...code 24 if you counted correctly. If it blinks twice..then stops, and then blinks 4 and then stops - thats code 24.

Code 24: Open in Circuit 944B or Low Resistance in Crash Sensor(s)

via http://probefaq.org/service/airbag-fault.html

Granted it's a Prove site, but most of the air bag stuff is manufacturer specific - so the codes SHOULD be the same. Hope that helps

-Drew