03CentennialV8
Member
- Joined
- March 10, 2017
- Messages
- 29
- Reaction score
- 1
- City, State
- Castlewood,Va
- Year, Model & Trim Level
- 03FordExplorer Centennial
Picked up a nice 03 v8 centennial the other day 2wd v8 great shape 163k miles. Go look at it has trans issues. Got a good deal so bought it. Anyhow get it back home clear the codes take a drive uphill will get you a p0731-734 incorrect ratio codes but when it shift's feels good doesnt slip holds tight. On level it does good unless you lay into it. The turbine speed sensor is 400rpm lower than rpm at idle and with motor at 3500 in 1st the turbine is about 1800 that's when it will bang in second gear hard but no slips. I'm thinking possible torque converter because it already has a rattle. Any insight is greatly appreciated. No noises and pan was clean and hasn't been messed with since problems started.