HELP: Parts for mono to 4dr leaf swap

[RPheezy]

Hey guys, I'm planning to swap out my mono for the 4dr leafs on my 98 Sport. I'll be getting the 4dr leafs from a junkyard and want to know if I need to get any extra parts (bolts, etc.). Also, I read that the 4dr leafs are 2.5" while the mono is 3". Is this an issue or will the 4dr leafs mount fine.

Thanks for your replies,
Raphael

 

[IAmTodd]

There is no extra hardware need unles you break or have to torch off a bolt. The mono is wider than the multi but that doesn't cuz a problem. I did the swap on mine and its alot easier with 2 people.

 

[Alec]

The only parts you need are the leaves if all your bolts are in good shape.

Having 2 or 3 people is nice, and 1 (2 is better) jack and a couple of jackstands.

Penetrating lube is also good, as is a nice breaker bar or cheater pipe. Oh, and deep sockets for the ubolts.

 

[anothergoatherd]

There is a very good thread on how to do this, some where on this site, just do a search. It has pictures and a list of tools needed. Very helpful. I printed it out and followed the suggestions when I did mine and it was very helpful and easy to do. I agree 2 people 2 floor jacks and 2 jack stands will help to make everything smoothly.

Good Luck!! I love how mine turn out. I got an inch of lift from the backend which leveled everything out and the ride is more stable, not really firmer but more stable with less body roll.

 

[aknoppe]

The mono leaf shrinks down to 2.5" at the end. There will be extra space between u-bolt and the spring pack. The job took me about 3 hours. Good luck!

Tony