Help to ID these air shocks

[desertland]

I've been searching on the net to see if i could find an image or info that would help me ID these shocks.

I could not find anything that had a brand or model number info on it. Both air lines meet up at a tee with a schrader valve to adjust the pressure. As of yet I have not even checked the pressure. I was wanting to find if there were set hi or low pressures as well as any general guide about this type of shock. Need less to say I've not had a rig with these on them.

Thanks in advance for any input.

 

[ncranchero]

Most, I say most, specify 35 psi minimum and 120 psi max.

 

[schroeder55]

They look just like the Monroe Max-Air Shocks (MA776) that I just installed on my 2002 ST a few months ago.

Check out Monroe's website for information and try this address for a picture: http://catalog.monroe.com/monroe/productImageDisplay.do?product=MA776&locale=en&catalog=MONROE

The website says 20-150 psi operating pressures. I believe they recommend in the instructions that you don't keep the pressure above 90 psi for normal use only under a load.

 

[ncranchero]

I run 35 psi in mine since it is lowered........