bigdaddyike
Member
- Joined
- October 25, 2010
- Messages
- 11
- Reaction score
- 0
- City, State
- Vilonia AR
- Year, Model & Trim Level
- '01 ranger
Thank you for the advice. sorry to butt in
-
Ford Explorer Community - Maintenance - Modifications - Performance Upgrades - Problem Solving - Off-Road - Street
Explorer Forum Covers the Explorer ST, Explorer Sport, Explorer Sport Trac, Lincoln Aviator,
Mercury Mountaineer, Mazda Navajo, Ford Ranger, Mazda Pickups, and the Ford Aerostar
Register Today It's free!
Help with my 2003 Explorer.
- Thread starter Liska
- Start date
Elite Explorer members see no advertisements, no banner ads, no double underlined links,.
Add an avatar, upload photo attachments, and more!.
Liska
Member
- Joined
- November 15, 2010
- Messages
- 46
- Reaction score
- 0
- City, State
- Western massachusetts
- Year, Model & Trim Level
- 2003 XLT
bigdaddyike
Member
- Joined
- October 25, 2010
- Messages
- 11
- Reaction score
- 0
- City, State
- Vilonia AR
- Year, Model & Trim Level
- '01 ranger
i have had code read 02 sensor and had them replaced but turned out to be catalytic converter. which is a better rearend glen
Liska
Member
- Joined
- November 15, 2010
- Messages
- 46
- Reaction score
- 0
- City, State
- Western massachusetts
- Year, Model & Trim Level
- 2003 XLT
Good news- my check engine light is finally staying off this time! I guess it didn't like being sprayed with water from the hose I had going before it turned back on! 
- Joined
- November 11, 2005
- Messages
- 57,105
- Reaction score
- 1,412
- City, State
- Brooklyn, NY
- Year, Model & Trim Level
- 88 89 93 95 96 Aerostars
I've moved your thread into the stock 95-01 section.
Liska
Member
- Joined
- November 15, 2010
- Messages
- 46
- Reaction score
- 0
- City, State
- Western massachusetts
- Year, Model & Trim Level
- 2003 XLT
For those who might be having the same problem as I did in the OP (because the CE light came back on AGAIN after turning it off), fear not! It might not be anything too major if the check engine light comes back on after intially doing the o2 sensors.
Mine ended up being a wire by the new o2 sensors that got melted/scorched from the exhaust and was causing the light to go back on. I got it fixed at no charge this morning. What a relief.
Mine ended up being a wire by the new o2 sensors that got melted/scorched from the exhaust and was causing the light to go back on. I got it fixed at no charge this morning. What a relief.
Explorer Features
Explorer Features