iheartbeams
Active Member
- Joined
- March 2, 2009
- Messages
- 59
- Reaction score
- 3
- City, State
- laguna niguel
- Year, Model & Trim Level
- 1993 xlt
im new here and i just got a 6 inch drop bracket lift for my 1993 4x4 explorer.
i am lost on where to even start on it. so here is my first set of questions.
1. how do i get the stock coils off?
2. should i take the beam pivot out first, install the bracket, then the coil? or vise versa?
3. What needs to be disconnected to get the beam down? (i.e. driveshaft, swaybars, brake lines)
4. will i need new brake lines? and if so, where can i get them?
thanks in advance, im excited to get it going but i want all the info i can get
i am lost on where to even start on it. so here is my first set of questions.
1. how do i get the stock coils off?
2. should i take the beam pivot out first, install the bracket, then the coil? or vise versa?
3. What needs to be disconnected to get the beam down? (i.e. driveshaft, swaybars, brake lines)
4. will i need new brake lines? and if so, where can i get them?
thanks in advance, im excited to get it going but i want all the info i can get