Hey I what is the size of a tail pipe on a 94 xlt explorer

[cgriffin_5139]

Unless your going to shove rocks up in to the frame rails then you will be fine.

 

[mental_help]

This is the muffler I was talking about...

http://store.summitracing.com/partdetail.asp?autofilter=1&part=FLO-42541-OR&N=700+115&autoview=sku

 

[cgriffin_5139]

Yep i have seen it but like i said, Unless your going to shove rocks up in to the frame rails. As the muffler sits between them, then you will be fine.

 

[mental_help]

Oh ok, I wouldn’t have to buy new exhaust hangers when i put a new muffler on would I?

 

[cgriffin_5139]

Um no unless there rusted threw. are you welding it on?

 

[mental_help]

Nope I am going to clamp it on with some of those exhaust clamps from summit racing

 

[cgriffin_5139]

Nope I am going to clamp it on with some of those exhaust clamps from summit racing

yep you will have to then

 

[mental_help]

dang is there any way i wont have to

 

[cgriffin_5139]

Yeah cut the old hanger off the muffler you have now and weld it on the new one. thats why i was asking if you were welding it.

 

[mental_help]

dang i was hoping i wouldnt have to weld

 

[cgriffin_5139]

You will also have to get a short piece of exaust pipe cause the oem muffler is longer than the new one.

 

[cgriffin_5139]

and also make sure you get an offset inlet and center outlet

 

[mental_help]

Thanks i was gunna ask you about that

 

[cgriffin_5139]

i know

 

[mental_help]

would jb quick weld work?

 

[cgriffin_5139]

no its epoxy

 

[mental_help]

what would happen if u put a muffler on backwards

 

[RangerX]

It doubles the horsepower.

 

[410Fortune]

easily double

 

[cgriffin_5139]

It will not allow the right back pressure. And you could do damage to your engine.

Don’t listen to these fools!