How do I remove window motors?

[Garyboy]

Hello ... I live in Florida and now 3 of 4 electric windows don't work! The dealer sold me nylon rollers 3 per unit since my motors still run they just "clunk - clunk - clunk" vs go up or down. I've removed door panels but couldn't locate screws to remove motor drive units? What gives I repaired everything on my wifes 94 XLT w/171K except this and she's gonna "Kill Me" if I don't fix it! She's threatening to go buy a new model!! HELP -- I'm not stupid. Does this require drilling out the dimples on the inner door frame? HELP Gary in Waldo (speed trap) Florida

 

[410Fortune]

If its still like the older trucks you have to drill the rivets and replace them with bolts...

 

[93ebx]

There are three square head bolts you remove and it comes right out. I believe two of them you can see very well but there is one where you have to drill out in the indention to get to the bolt. you can reach your hand in behind the motor and feel the bolt holes and you will see the indention I am referring to on the front side of the panel. I hope this helps

 

[SteveVB]

A thread about window motor replacement