Medic648
New Member
- Joined
- April 19, 2010
- Messages
- 3
- Reaction score
- 0
- City, State
- Woodlawn, VA
- Year, Model & Trim Level
- '99 XLT
I just recently have had a problem with my driver side electric door lock. The mechanism would hang, preventing the driver in or out of the vehicle. The other door locks remain unchanged. Since then, the interior door handle appears to have came off the mechanism and is stuck in it's current position. The exterior door handle is still functioning. I have the door unlocked and have removed the fuse to prevent the locks from working. This was only a temporary fix and now vehicle state inspection is approaching, I am trying to remove the driver side door panel to attempt to fix the problem. I see two screws above the door handle and have removed them, and the bottom of the door panel appears to just snap into place. In an effort not to break anything else, I just wanted to get some input to see if there was any more things I needed to remove to proceed. I do have electric mirrors and the controller is on top of the panel. Does this need to be pryed off? Also, has anyone had a similiar problem to this and how did you go about correcting it?