How to remove Glove Box?

[cgbier]

I finally found the time to get the side panel out to reach to the amp for the radio. However, my plan to simply get rid of the amp and solder in and out together didn't work for some reason, so I'll pull the lines from the radio directly to the speaker harness.

As I'm gonna use the original harness, I only have to run 4 lines to the right side panel. No need to take doors apart or take out the left rear panels.

To do that, I'd need to run the cables through the dashboard. The glove compartment seems to be the only access to the latter, but how do I get it out?

Help, please!

 

[Kesp4.0]

Open the glove box door. With it hanging open, grab both sides of top of the glove box and squeeze both sides in and it should fully fall open. There are two screws you can now access, and should come out with either a star screwdriver or a really small socket. I don't remember the size but I usually remove mine with a star bit

 

[cgbier]

Oh, ok. The box hanging down is already sufficient. All I need is to reach inside the dashboard to pull the cables to the kick board.

Thank you very much for the answer. I saw the screws at the bottom already, but couldn't figure out how to handle the top part.