ignition coil

[patrick82]

So i would like to replace my ignition coil = the reason is sometimes my car doesnt want to start right away after it pours. I have new plugs and wires. I have a friend who thinks it could be the ignition coil........

so does anyone have a good website or a link on here that would have a step by step with some pics of what 2 do... is it easy enough to do or is it something to leave to the pros??

thank you

 

[Explodr94]

If you have a Haynes manual they show you how to test with a multi-meter. On the side positive connector and check the other pins with negative - ohms should be 0.3 - 1.0. On the top going 1-5, 2-6, 3-4 resistance should be 6.5 - 11.5.