Injector question | Ford Explorer Forums

  • Register Today It's free!

Injector question

Jmonger

New Member
Joined
October 30, 2021
Messages
1
Reaction score
0
City, State
Keezletown
Year, Model & Trim Level
2000 explorer xlt
Hi, I have swapped a 2001 explorer v8 into my 1999 ranger. After driving it for a few years it was squirting antifreeze out from between the intake and the head. So found a rotted lower intake bolt. Pulled the heads bla bla. I need advice on fuel injectors. I want to replace all of them. Need advice on which ones to buy and how to get the old ones out of the intake. (Trying not to break the bank)
 






the old ones pull directly out, they are only held in my pressure of the O ring against the lower intake injector holes
Remove the fuel rail hold down bolts, wiggle and pull the fuel rail and injectors out

New matched set of 4 hole bosch 19# injectors can be found on ebay by reputable sellers

MAKE SURE you get BOSCH, flow tested and matched
they are not expensive



You can also bench test/clean your own injectors if you like, they can last many many miles
 






Featured Content

Back
Top