Lifters, Pushrods and rockers

[JamesSupp]

Hello I'm currently at a halt with my rebuild on my 99 4.0 ohv. I recently rotated the crankshaft to bolt my torque converter to flywheel. My question is do I have to rotate the engine to TDC to properly install the lifters. The old lifters have been out since I have rotated my crank. Also wanted to know is there any kind of adjustments with these rocker arms that I should know about. Any help would be greatly appreciated Thank You!

 

[poker4me007]

No it doesn't have to be top dead center...I don't know what kinda of work you did to your motor , but if you took your lifters out, they need to go back in the same place,so do the pushrods... There's no adjustments, rocker arm's bolt on torque to spec...