Rwrighttt
Active Member
- Joined
- December 11, 2014
- Messages
- 84
- Reaction score
- 7
- City, State
- md
- Year, Model & Trim Level
- 92 twin sticks
Hey all, I hydrolocked my 92 explorer motor last week, and I just finished swapping in a 91 4.0 v6. Everything went great and all, but when I go to start it, it cranks for a good 5-8 seconds before firing up. Meanwhile the check engine flickers off or comes and goes. Runs great when it starts, no stumble or anything. So it has to be a ignition problem some how. I changed the coil pack and crank sensor with spares and still nothing. New plugs also and cleaned the MAF. I ran a test with my scanner and nothing came up. No check engine light when it's running also, just when cranking. I checked my voltage on my battery and it does dip to 11.5v when cranking. Maybe need a new one. What does the motor need to read to start up? Because I'm thinking its something ignition related. Thanks for any help!