Dekes_n_Watson
New Member
- Joined
- July 21, 2012
- Messages
- 1
- Reaction score
- 0
- City, State
- New Jersey
- Year, Model & Trim Level
- 2006 Explorer XLT 4.6L
Hey everyone,
First post here. Just bought an 06 XLT. A/C doesn't blow out cold air. I bought a gauge for the low pressure port and tested it today with the outside temp being about 75F. With Max A/C on, the gauge reads 10 PSI and slowly climbs to about 50 PSI and then shoots back down to 10 PSI and repeats. I added some r134a but nothing changed so I figured before I overfill it, I would ask on here to see who may know before having a shop look at it.
When it hits around 50 PSI I hear a click and then it shoots down to 10 PSI and starts to build back up. I assume the click is the compressor?
Thanks for any feedback in advance.
First post here. Just bought an 06 XLT. A/C doesn't blow out cold air. I bought a gauge for the low pressure port and tested it today with the outside temp being about 75F. With Max A/C on, the gauge reads 10 PSI and slowly climbs to about 50 PSI and then shoots back down to 10 PSI and repeats. I added some r134a but nothing changed so I figured before I overfill it, I would ask on here to see who may know before having a shop look at it.
When it hits around 50 PSI I hear a click and then it shoots down to 10 PSI and starts to build back up. I assume the click is the compressor?
Thanks for any feedback in advance.
