lower t-case gearing options

[dkchrist]

I would like to get lower gearing in my truck. Have 03
sohc 5 speed with electric shift t case BW 1356(is that right or is it 1354)? what can i do for the least money to get lower gearing?

 

[CodePoet]

new gear in the axles. The x-fer cases in these are chain drive.

 

[RockRanger]

http://www.pirate4x4.com/forum/showthread.php?t=465032

I have one. Havent wheeled with it yet though. Probably the cheapest option. An Atlas would be the easiest tough. changing the diff gears would be the cheapest if that would work for you.

http://www.explorerforum.com/forums/showthread.php?t=125858&page=14&pp=30 Starting about here will show you how to put a BII tank in if you need the clearnce and then a few pages after that shows how I did the doubler.

 

[CodePoet]

forgot about those haha

 

[dkchrist]

will any other t-cases bolt up or does anyone make an adapter for like a rubicon t case?

 

[RockRanger]

Just swap in a different tranny if you want to use a rubicon tcase. The ranger uses an oddball 5 bolt 25 spline tcase. They are the only to use it so it is difficult to swap. There is also the stubler but I dont have a link for it. It is much like the Dand D one just about an inch shorter though but twice the cost.

 

[dkchrist]

so then no other ford t-case will swap in huh

thanks for the input guys i already have 4.10s and would like to stick with them maybe if i get 33 i will go to 4.56s again thank for the input

 

[dkchrist]

found the stubler might be worth a try only 800 plus shipping

 

[wanderer351]

Stubler= awsome!!

www.4-x-fab.com

theres also a kit made by D.D. Machine over on Pirate4x4..its cheaper..but you need to do some fab work and source a case to do it...also ALX over at RRORC.COM is using the kit and making drop in kits with them..

check out my thread on the stubler..