josephexplorer
Member
- Joined
- November 21, 2006
- Messages
- 21
- Reaction score
- 0
- City, State
- Vicksburg, MS
- Year, Model & Trim Level
- 96 XLT
Does anyone know where i can get manual hubs?
-
Ford Explorer Community - Maintenance - Modifications - Performance Upgrades - Problem Solving - Off-Road - Street
Explorer Forum Covers the Explorer ST, Explorer Sport, Explorer Sport Trac, Lincoln Aviator,
Mercury Mountaineer, Mazda Navajo, Ford Ranger, Mazda Pickups, and the Ford Aerostar
Register Today It's free!
Manual Hubs
- Thread starter josephexplorer
- Start date
95exploderboy
Locked and Loaded
- Joined
- August 12, 2002
- Messages
- 908
- Reaction score
- 3
- City, State
- Annapolis, MD and Lebanon, PA
- Year, Model & Trim Level
- 1995 Sport
There is no such thing if you have a second gen explorer. Because you have a 96, you basically have them in the form of your central axle disconnect "CAD". The axle shaft on the right side is actually two pieces and when you shift into 4wd a shift fork on the axle moves a coupler to connect your two axle shafts together. Or you could do what I did and put in a Manual shift BW 1354 and then permently lock the CAD. This provides a much better 4wd system than the Auto 4wd that only turns on after you are nice and stuck.
Explorer Features
Explorer Features
Similar threads
