Sscolax
Member
- Joined
- June 5, 2006
- Messages
- 46
- Reaction score
- 0
- City, State
- Colfax, CA
- Year, Model & Trim Level
- 94 Eddie Bauer
Missing sensor on 91 4.0
I'm in the middle of swapping a 4.0 from a 91 Explorer into a Bronco II. The Explorer originally had the heads off the engine when I acquired it and so there was a bunch of stuff not hooked up. On the harness that passes across the top of the firewall there's a pigtail with an oval connector coming off right near the A/C box. I believe there's supposed to be a BAP sensor there, but I need to confirm this. Also, if someone can provide a picture of how it was mounted that would be very helpful! I've used my 94 Explorer as a reference for most of the reassembly process, but it doesn't have this pigtail coming off the harness.
I'm in the middle of swapping a 4.0 from a 91 Explorer into a Bronco II. The Explorer originally had the heads off the engine when I acquired it and so there was a bunch of stuff not hooked up. On the harness that passes across the top of the firewall there's a pigtail with an oval connector coming off right near the A/C box. I believe there's supposed to be a BAP sensor there, but I need to confirm this. Also, if someone can provide a picture of how it was mounted that would be very helpful! I've used my 94 Explorer as a reference for most of the reassembly process, but it doesn't have this pigtail coming off the harness.
