More Power

[keithmobile]

If anyone can help or has some ideas.
Im just looking for bolt ons, intake, exhaust, programmer, mabey nitros, or turbocharging.

 

[RubySlow]

well Exhaust. cut the secondary cats. then get a turndown exhaust, then get an excal2 than have Jah program it.. then get a bigger t-body... then maybe MAF and Injectors

 

[jah81592]

If anyone can help or has some ideas.
Im just looking for bolt ons, intake, exhaust, programmer, mabey nitros, or turbocharging.

Just my forte-V-6 SOHC!!!! I offer everything you will need and also can offer the customer service as well. My opinion the first bolt on I would do is the underdrive pulley. This is single most gain (bang for the buck) you will purchase. PM or email if interested and I will be happy to assist with your needs and technical advice.

 

[Exploderpilot]

i would just bolt on two extra cylinders

 

[aldive]

I seconf the underdrive pulley(s); great bang for the buck.

 

[Exploderpilot]

What about the electric fans? i was thinking about doing it on the blazer. is it worth it?

 

[aldive]

What about the electric fans? i was thinking about doing it on the blazer. is it worth it?

I am very happy with the e fan on mine.

http://www.explorerforum.com/forums/showthread.php?t=140251&highlight=electric+fan

 

[aldive]

Another good mod is a throttle body; take a look at http://www.explorerforum.com/forums/showthread.php?t=139454&highlight=mustang

 

[Jakee]

My opinion..best to worst..

Flasher, undrive pulley, exhaust, e-fan, intake, throttle body, MAF housing..

But, if I were to do it over again, I would do it this way.

Complete tune-up. make it run as good as possible without spending too much first. Clean injectors....ect.

Intake, exhaust, flasher, e-fan, undrive pulley, throttle body, MAF housing.