NEED HELP! lifting a 95x

[CodePoet]

I would do the same...hell i'm about done gathering all the parts for a full sas and it's not even come close to what a ifs lift would cost. Product of taking your time and looking for deals

 

[93liftedXLT]

If i had a 95,

PA 3'' BL
2'' TT
3'' Spindle kit of Ebay
Shackles
SOA

33's-35's 15x8-15x8 rims, maybe some gears, and your Golden, or just go SAS

Not that hard, good luck

 

[95xrider]

Im not doing the suspension lift jsut to clear the tires, I also want the ground clearance. But I think im gettin the 96+ 4" superlift. IS this right?

 

[95xrider]

Also the local shop said i would probably only get an inch out of a tt if i was lucky, but im not to sure how accurate that is.

 

[96limitedX]

93liftedxlt, the spindle lift only works on 2WD explorers. not 4x4 explorer.


yes that would be the right super lift to use.


EDIT: every truck is different with its torsion twist..but you will surly get more then 1"

 

[95xrider]

good to know, But along with the 4" SL i want a 2" BL, Would i get the 91 - 94 explorer lift or the ranger lift? Ive heard 2 different things.

 

[sn0border88]

what ever you get, it cant be for a 97 or under ranger or 91 to 94 explorer. The front ttb is totally different from your IFS and will not work.I will also say tt and AAL, or if its possible (someone check me on this) TT with 3" bl in front and SOA in rear with no body lift. And you can get 1.5-2" out of a TT

Links.
Dead Link Removed
Dead Link Removed
Dead Link Removed

 

[96limitedX]

i used the 91-94 explroer 2" body lift part#792 from PA. i'm very happy with it.

 

[95xrider]

Cool, Now did u need to do any bumper mount mods or anything like that?

 

[sn0border88]

if you use the ranger kit

 

[davidmmm69]

now are you 2 wd or 4 wd...
i used
PA 2'' BL #792 good except stupid no bumper brackets and over a year now and bumpers still messed up.
3'' Torsian Twist
Shackles
2 add a leafs each side in rear.
3'' Spindle lift

33 inch tires. 35's would fit fine if i removed my steps..

 

[mynameisaric]

you can use the brackets that come with the kit to move the front bumper up and i made new rear brackets in about an hour at my welding class in school. and that was with the 2" 91-94 explorer pa kit

 

[95xrider]

its a 4x4, so with the 91-94 x lift i will get the front bumper bracket but the rear i will have to make? How hard is it to make one? is it complex?

 

[mynameisaric]

no.. its an L-shaped bracket with holes in it. pretty basic

 

[96limitedX]

i made my front and rear brackets by modding the brackets they gave me in the kit. it was pretty easy to do once you look it over and see what you need. i did mine before my truck left the garage cause i was not gonna drive around with the bumpers hanging down.