Need help w/ rear brakes in a POS

[crafty_23456]

I was replacing the brake lines in a old grand am and I cant get the bleeder nipple to come loose. I soaked it for a few days and its rusted in there good.
Will the rear brakes need to be replaced? Any ideas of what to do?

 

[james t]

If you can get the bleeder loose by tearing it up with a pair of vise grips or other means then you can get a new set of bleeder screws at any parts store. If you still cant get them out, then you can just go buy a new set of wheel cylinders. The wheel cylinders are dirt cheap, probably less than $8 a piece.