Noisy ValveTrain-OHV...........Delta Rockers?

[jd4242]

ill find my papers for the stock ones then. no idea what the rollers would take. if anything, stock one one end and whatever you want for the roller end. that just means youd have to put them in a certain way for em to work right.

that looks like a set for an inline/straight 6? without the rest, maybe $90? i still stand by my sealed powers, my lifters are my problem

it is for a straight 6 but said to use the same shaft size but are 1.5ratio not 1.4 like our stock.witch means it would act like i have a bigger cam,opening the valves more and letting more air in.yea if these dont work i will be going with SP and spacers

 

[Xeek]

that sounds interesting.... would that require more fuel? atleast in my case?

 

[Dono]

Xeek, you would be fine with what you have.
I quit this when I couldn't find roller rockers, and emails weren't getting returned.

Id love to see if these rockers would work. Any extra flow is good flow.

I wonder if they will line up for the push rod, and strike the valve shaft ok without binding?
This might not be east to test, and no one really seems to have tried it.

 

[jd4242]

They have been ansering my emails and are talking measurements for me to so if they are even the same size.im pretty sure im going to go with 1.5 nonadjustable rockers

 

[Dono]

Excellent!
As soon as you know something, pls post.
I'll order a set also.

I'll check on the rocker spacers tonight (I don't have my login info with me).

 

[Dono]

for both.i think i may just try and run these.i sent them an email to ask if they can sell them without the shaft so we shall see.im pretty sure we had another thread somewhere and got some emails back from some people but i cant seem to find them anywhere
http://www.classicinlines.com/proddetail.asp?prod=RAS-200-NRA

tee rev says he even worked half of xmas day, so he hasnt had a chance to do the rocker spacers yet. I also asked about the rockers in the url above, and he says they will not work. He didnt give any more info as to why.

 

[jd4242]

I wonder why he said that? Ive never see anyone talk about using these. Maybe he meant with his spacers.ask him to elaborate

 

[Dono]

I'll see what I can find out.
I did reply yesterday that we were hoping to find some higher ratio rockers that would work.

Tee rev is a machinist by trade and owns his own machine shop. He has made our ohv's go fast, so I would think he has a pretty good idea what can be done that's reasonable.