OBD code retrieval

[rgerber2]

I was wondering if there is anyway to retrieve the obd2 codes from my 2002 explorer. I know my jeep buddys can do this by cycling the ignition a few times and it comes up on the odometer or by flashing the check engine light. Is there anything like this on ford ?

 

[kert0307]

Go to autozone or a parts place. Most places will read them for free. Or you can buy your own reader for like $65 from wal-mart

 

[aldive]

I was wondering if there is anyway to retrieve the obd2 codes from my 2002 explorer. I know my jeep buddys can do this by cycling the ignition a few times and it comes up on the odometer or by flashing the check engine light. Is there anything like this on ford ?

You need to use an OBD2 code reader or scanner.

 

[mawrazen]

DIY trouble codes. Using Analog Voltmeter or test light.

Connect analog voltmeter to data link connector located in engine compartment. When a diagnostic trouble code is reported on the analog voltmeter for a functional test, it will represent itself as a pulsing or sweeping movement of the voltmeter’s needle across the dial face.

Accessing diagnostic trouble codes. Use the Analog voltmeter or Test light method, not both.