Oh My Goodness that was easy! hubs

[stoneyh]

I just converted my autohubs to Warn manuals. This was so easy, I think I could do them all daylong. After the wheel was off it took less than 10min. to change out the parts. Thanks to all that helped me with the info on converting. I followed Warn instructions as well as the write-up by Matt Bobbitt and it went smooth. Thanks again Bryan H.

 

[410Fortune]

Getting to know your wheel bearing pre load and spindle nut torque is a beautiful thing..........

Next you are ready to pack your own bearings and do your own brakes..... , or heck even rebuild a shift motor!!

 

[stoneyh]

easy

I did the brakes not long ago, so it is ready to roll.

 

[jimbo74]

good job.... the first one i did when i did mine took like 6 hours.... the second side took 10 minutes....... a bit of a learning curve for me

 

[410Fortune]

wait till you try it on a D44 TTB, whole new ball game! Those full size hubs are alot different, htere is one O ring that can be a real bear if you dont have the right O ring pick. (bent fork works good)