thammel
Active Member
- Joined
- September 20, 2004
- Messages
- 93
- Reaction score
- 0
- City, State
- Baltimore, MD
- Year, Model & Trim Level
- 2002 XLS
I replaced my rear rotors last week with new EBC ones. I notice now that the outer diameter of the rotors is about 1/2" away from the outer edge of the calipers. In other words, the rotors appear too small and could be at least 1/2" bigger in OD. My rough measurement is that they are 11.0" OD. What is your rear rotor OD? I have a 2002 XLS, 4WD with 4.0 liter engine. I'm concerned because the wear pattern on the rotor surface lloks too small, like I'm not getting full pad swept area.
Thanks,
Tom
Thanks,
Tom