jack1018
New Member
- Joined
- November 13, 2009
- Messages
- 3
- Reaction score
- 0
- City, State
- Calgary, Alberta
- Year, Model & Trim Level
- 99 XLS
Hi, After replacing the clutch on my 99 and now it has a P0136 code on average once a day. So far I have tried the following:
- cleaned the MAF with electrical cleaner
- no exhaust leaks
- no visible damaged wires (pinched or burnt)
- cleaned the contacts with electrical cleaner on both connectors
- removed the O2 sensor and did a bench top test. The heater circuit measured 3 Ohms and it went up to .800v with a propane torch to the sensor tip.
I am quite certain that it is not the O2 sensor itself.
Any advice? Thanks in advance.
- cleaned the MAF with electrical cleaner
- no exhaust leaks
- no visible damaged wires (pinched or burnt)
- cleaned the contacts with electrical cleaner on both connectors
- removed the O2 sensor and did a bench top test. The heater circuit measured 3 Ohms and it went up to .800v with a propane torch to the sensor tip.
I am quite certain that it is not the O2 sensor itself.
Any advice? Thanks in advance.
