PIAA Pro 80 XT, Which wire goes where?

[Gofast]

OK, Thanks to the group purchase many years ago, I have a nice set of lights to mount on my ride.

The problem is I don't have the wiring instructions.

The Huge White Wire is most likely = Battery / Hot

The Huge Black Wire is most likely = Ground

There are 2 small wires, 1 White, 1 Black with the round bullet type plugs on them. Where do they go?

There is also another small white wire that comes off the toggle switch. Is this a hot or a ground?

I'm lost with the little wires right now. Not really sure where they are supposed to go.

Any help would be great.

Thanks Rob

 

[rydinhigh]

Lets see here

Huge white wire goes to battery
Huge black is ground
As for the two small wires with plugs on them they should go to the fog lights ( I need more info on them though to be positive)
Small white wire off toggle switch goes to acc power.

 

[Bill Kemp]

Comming off the switch are three wires. Blk.=Ground.
Wht. W/plain or cut end=switch power. Bullet end= to relay.
There may be some info on the www.piaa.com site also.

 

[Gofast]

Still working it...

I have looked at PIAA site a couple of days ago. They said they would fax me the wiring diagram, but nothing has showed up.

The ligths plug into a wiring harness. So there is nothing to run there.

The big wires make since and so does the wire coming off the toggle switch.

I'm still at a loss of what the other 2 small wires are for. One is white and one is black. They are part of the wiring harness kit, but I have no idea of what there purpose is.

Thanks Rob

 

[Alec]

Where are these wires coming from and what connectors do they have again?

 

[Bill Kemp]

The wire that goes to the relay from the switch may have bullets on both ends which plug into recepters comming out of the relay & switch wire.
The relay is also grounded by a short black wire that usually I ground at the same screw I use to mount the relay.
Look at this diagram and fit your pieces to fit theirs.
http://catalog.com/susq/other/auxlamps.htm
Only difference is that your fuse is in the relay and your switch is also grounded by the black wire .