procomp shocks?

[kontinu1]

I recently bought the ebay 2in budget lift (add a leaf-coil spacers) i figured i would get the warrior 153 shackles and do it all at the same time. When I got the lift kit they asked me if i wanted to get the shocks to go with it. The procomp es3000 or something. I went ahead and ordered the shocks. I started the lift today i got the left back done, but it seems like th stock shocks are longer than the procomp shocks. I have the shock fully extended and it barely reached the axle. I had to jack the axle up in 2 spots to get it to fit. Is this right because it shure doesn't look right? maybee i will have to wait until both sides are done and on the ground. But the travel seems limited now!

 

[ld50]

Been there.
You are me in the parallel universe?

Check my mod thread in my sig.
I lowered my upper mounts to make them fit better, also, I used warrior skidplates, which raised the lower points. Then later, I mounted to the axle and raised my upper mounts, but the body lift helped with that part. Anyway, it is fairly easy to bring the mounts down.

How is your emergency brake cable BTW?

-oh yeah, one of the front es3000 shocks has started squeeking like a ******* and is bugging me to no end, damn procomp!

 

[kontinu1]

i dont think my e-brake worked in the first place. but im shure it doesn't work now

 

[X-1]

In about three weeks, I will be pulling off 2 rear 4inch pro comp 3000's, if anyone wants them cheap, I am going higher, and will have to get 6 inch shocks, these are 3 weeks old, and will sell cheap.

 

[kontinu1]

i am interested let me know when you take them off and how much, how much use do they have?

 

[X-1]

When I take them off, I will be looking about 40.00's shipped for both, they came with red boots, and with 4 inch superlift springs, they still have travel in them, should work well for what you have in lift. E-mail at ROWELL1366@aol.com if you are interested, and I will save it, and e-mail you back when they come off, about two to three more weeks.
David