ttbit
Well-Known Member
- Joined
- June 24, 2004
- Messages
- 404
- Reaction score
- 8
- City, State
- Maryville,TN
- Year, Model & Trim Level
- '01 ST 5.0 sold
'07 ST8
What is the best way to remove the transfer case from the transmission on a 1996 5.0 Explorer?
I have the tranny and case out and want to separate for more room for moving and I plan to drop the 5.0 and tranny in together next go around. Don't think it will fit with the tcase attached.
I am moving to the other side of town, so the least messy would be great. There are 4 bolts that hold the extension housing and 6 for the tcase, I believe. Which set should I remove to separate?
I haven't worked with 4x4/AWD applications before so all of this stripping down for a 5.0 swap into my Sport Trac has been a new learning experience. Just want the safest/easiest way to do this.
Thank you,
Don
I have the tranny and case out and want to separate for more room for moving and I plan to drop the 5.0 and tranny in together next go around. Don't think it will fit with the tcase attached.
I am moving to the other side of town, so the least messy would be great. There are 4 bolts that hold the extension housing and 6 for the tcase, I believe. Which set should I remove to separate?
I haven't worked with 4x4/AWD applications before so all of this stripping down for a 5.0 swap into my Sport Trac has been a new learning experience. Just want the safest/easiest way to do this.
Thank you,
Don