D
Well-Known Member
- Joined
- November 26, 2000
- Messages
- 125
- Reaction score
- 1
- City, State
- Olympia Washington
- Year, Model & Trim Level
- 2000 ranger XLT off road
I am replacing the passenger side radius arm bushing on my 91 4x4. I have the spring, shock, & sway bar disconnected. But I canot pull the axle forward enough to get the end of the radius arm out of the bracket. Do I need to remove the radius arm from the axle? or is there some other trick for the passenger side bushing. I didn't have to do that on the other side.