Saleen Wheels

[Blackstang3o2]

I did a search and cant find what im looking for so i figured id ask. I have a 97 Mountineer, looking at the 18x9 Saleen replicas i noticed they are 5x7.5 bolt pattern and with a 24mm backspace. Will this fit? I have the AWD if it makes and difference.

 

[jimbo74]

i dont think any saleen rim had a 5 on 7.5" bolt pattern....

 

[IAmTodd]

They'll fit. They're 5 on 4.5.

 

[BeauJ]

Beat me to it Todd. I was looking for a pic of you truck to post, but you've all ready done it

 

[CDW6212R]

They look like the Saleen XP8 wheels, in white.

 

[Blackstang3o2]

sounds good thanks for the help

 

[Blackstang3o2]

They'll fit. They're 5 on 4.5.

yours is what i came up with with search i just couldnt find correct offset.

 

[IAmTodd]

Look into a good set of 1/4" spacers for the front. I still rub the sway bar with them, but it would be much worse without them.

 

[Spdrcer34]

I have a 2wd 92, and I have the 18x9's up front (18x10's rear). No Spacers...had to SLIGHTLY modify the spindle so I would be able to put the center caps on.

I do rub on the sway bar at FULL LOCK, but I don't care, I'm so low that I rub on the fender WAY before that happens....lol

Ryan

 

[IAmTodd]

I have a 2wd 92, and I have the 18x9's up front (18x10's rear). No Spacers...had to SLIGHTLY modify the spindle so I would be able to put the center caps on.

I do rub on the sway bar at FULL LOCK, but I don't care, I'm so low that I rub on the fender WAY before that happens....lol

Ryan

Totally different suspension setup.