Skyjucker brake line kite... This doesn't seem correct.

[Dirt Research]

Skyjacker brake line kit... This doesn't seem correct.

I purchased a 6" Skyjacker lift for my 93 X, and it would appear that I've got two different lines for the front end.
First, one line is an inch shorter than the other line. Second, the lines have two completely different ends. Before I hit the phones to do battle with Skyjacker and their distributor, I figure I'd ask all of my fellow Explorer owners about this. Is this normal for an after-market kit? On the stock vehicle the front brake lines are identicle. With the exception of the increase in length, an after-market brake line kit should not be so difficult to make. The brake line kit from Skyjacker is FBL36, and there is'nt much in the way of instruction. If anybody out there has experienced this problem, please tell me about it . THANX!

 

[special ed]

if i recall
the front lines should be the same lenth
when i got my set in the mail they had sent me the wrong t-block, that only one of the front lines would fit into..
i called them up and they sent me a new one that worked out great
just my 2cts