Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Ford Explorer Community - Maintenance - Modifications - Performance Upgrades - Problem Solving - Off-Road - Street
Explorer Forum Covers the Explorer ST, Explorer Sport, Explorer Sport Trac, Lincoln Aviator, Mercury Mountaineer, Mazda Navajo, Ford Ranger, Mazda Pickups, and the Ford Aerostar
The light remains on after it's flashed the trouble code several times. prior to doing anything, count the flashes when you first turn the ignition on and report back here.
** **** ** **** ** **** is what you would see for code 24, for example.
Well, when you first turn the ignition on the light flashes (3) times for a serious of 5 sessions then remains on. It looks like a bear to get the module as well.
Well, when you first turn the ignition on the light flashes (3) times for a serious of 5 sessions then remains on. It looks like a bear to get the module as well.
The codes are 2 digit codes. Based on your counts we will assume it's code 33 which is "Restraint System — Safety Belt Pretensioner Status (Driver Pretensioner Circuit Fault)"
Common cause is the connector under the drivers seat becoming disconnected. Check the yellow connector for a good tight clean connection.