Starting problems

[Scambi]

I've changed my battery, starter, starter solinoid, ignition, and ignition starter switch... any ideas or suggestions? It sounds like it is trying to crank over but just doens't quite make it...

 

[duke16]

I've changed my battery, starter, starter solinoid, ignition, and ignition starter switch... any ideas or suggestions? It sounds like it is trying to crank over but just doens't quite make it...

Can you rotate the crankshaft manually? Turn it clockwise.

 

[geoph1986]

I had a similar problem, and when I changed my battery cables it went away.

 

[marragtop]

Run a wire from the positive battery terminal to the connector on the starter. If it spins then the problem is in the cabling. If you get the same result that you have now, then it's either a battery, starter, or flywheel issue.

 

[Blacksheep Josh]

Just go ahead and replace all the cables. Positive and Ground cables. You replaced everything else, when it all honesty it might've been only the cables that were bad.

 

[Scambi]

oh yeah...

I forgot to mention, I already replaced the wiring when I changed the ignition and starter... I haven't tried turning the crankshaft though, ill have to try that in the morning, thanks for all the help guys!