Step by step instructions

[dogfriend]

o5 (last one)

 

[jenbaker]

WOW!

Thanks so much!!!!!!!!!!!!!!

 

[lonestar]

Is that from one of those CD manuals off ebay?

 

[dogfriend]

yep

 

[rydinhigh]

Dude if you are doing the spark plugs here is some forwarning advice. Make sure the truck has been turned off and sitting for a long period of time. Also get a set of thoese mechanics gloves. You will know why once you start doing it. Make sure to wear a tight long sleeve shirt (unless you like the scraped up skin mark look). It took me about 2 hours to do my plugs and wires. Just take your time and don't get frustrated. Also if you have a lifted truck forget about it. I am 6ft 1in and had to stand on a bucket to reach down inside there.

Well on a good note the 2 o2 sensors are pretty easy. The clip on the pass side is easiest to get off by going through the pass side wheel well.

 

[taxx]

Originally posted by rydinhigh
Dude if you are doing the spark plugs here is some forwarning advice. Make sure the truck has been turned off and sitting for a long period of time. Also get a set of thoese mechanics gloves. You will know why once you start doing it. Make sure to wear a tight long sleeve shirt (unless you like the scraped up skin mark look). It took me about 2 hours to do my plugs and wires. Just take your time and don't get frustrated. Also if you have a lifted truck forget about it. I am 6ft 1in and had to stand on a bucket to reach down inside there.

Well on a good note the 2 o2 sensors are pretty easy. The clip on the pass side is easiest to get off by going through the pass side wheel well.

Or just sin on the engine