theSLEEPER
Active Member
- Joined
- March 22, 2010
- Messages
- 61
- Reaction score
- 0
- City, State
- Bay. St. Louis, MS
- Year, Model & Trim Level
- 97 Eddie Bauer 2wd
Everything about that build sounds like BS. My answers are in red. Someone is lying... Oh well, no big deal...NOW THEN Specs on the diesel. crew cab longbed f-250. Has Forged steel internals(forgotten make), bored over to 7.4L's What's that .10 over?, Livewire custom tuned6.0 parts, ARP headstuds, K&N Cold air intake (W/ custom large intake pipe), Cowl induction, 190cc Ryan casserly built injectors,Ryan Casserly does NOT build a 190 for a 7.3, or a "7.4" Industrial Injection VGT-Hypo Turbo,6.0 part... intercooled with HUGE water-air piece, Aftermarket trans cooler, Has 4:10's front and rear, bulletproof 4R100 transmission,7.3 part...100 shot and a 150 shot of nirtus, 7 inch custom driveshaft rear, 4 inch driveshaft front, banks dual 5 inch downpipe-back exhaust kit,propain starting kit, is on a 6 inch full suspension lift, dual shocks front and rear, runs around town on 38x16.5 Superswampers. the drag radials were 35x16 hoosers, front and rear. He can "Chirp" them off the line, not roast. best time with this setup has been a 13.12 at 98 mph(elevation was 120ish ASL, and OAT was a cold 38 degree's. I was unable to procure picks or video as he does not have a digital camera, all of his pictures are on FILM...FILM!! Who does film.. i should be seeing him at the track though in a few weeks and will try and pirate some media on the truck at that time.
What YEAR is this truck?
Does it even really exist?
Why do people feel the need to lie?
I KNOW for a fact that if he told you that stuff, he's a liar.
If the truck is running 13's with 190's, then it's a 6.0, so he lied about the 7.4 part, and the 4R100.
If it's running 13's with two stages of nitrous, on a 6.0, something's wrong with his truck.
If he's running 13's with 190cc injectors... On a 7.3 CCLB, he's got a record.
If he put a 4R100 behind a 6.0, he's got more money than brains...
I honestly think someone searched around a little and put together a bogus build sheet.
I've also never heard of a "Custom 7" driveshaft". Seeing as to how there's tons of trucks that are much bigger, and quicker running stock driveshafts...
If he put a VGT-Hypo, it's either a 6.0, or someone is lying...
I'm done arguing about it, I just cannot stand the BS some people make up...
You will make them cry until you hit the twisties.
Please don't take this the wrong way, but I just don't see the point in modding an Explorer to be fast, seeing as how they will really only ever be fast in a straight line and even then, seems like a bad platform to start with.
The video you told me to search for I found. Looks great until you read what is done to the thing.......
How much did all that cost? You do realize that both of those cars ran terrible times right? I mean, 13.9 for an Explorer is good, but 13.9 for an Explorer with that much money dumped into it is terrible. And clearly the GTO driver couldn't drive. Seriously, who pilots a LS2 GTO to the tune of a 14.4 second quarter mile? Those things can run high 12s stock with some slicks and decent driver.
265rwhp in a 4000+ lbs vehicle isn't that great. For instance, I will use a car that I know well. Take a 350Z with the HR engine in it (07-08). They generally dyno around 265 to the rear wheels (306 bhp), weigh in around 3300lbs and run mid to low 13s stock. Factor in all the other performance oriented aspects of the vehicle that a SUV doesn't have such as the tranny, LSD, suspension setup........well you get my point.
Again, not trying to be a ball buster or hate on your passion that you have for your vehicle, just trying to be a realist. But I guess that is what makes enthusiasts such a different breed, we all have our own tastes. If I were looking for a SUV to race I would go with a Cherokee SRT8 or maybe find a Cyclone!![]()
This, i cannot agree with at all. If everyone just chose to build up "fast" cars, the world would be pretty boring wouldn't it... And we wouldn't have lots of cool stuff we have now.
My truck wasn't designed to run 12's, but I'll be damned if I'll ever stop trying to get it there! Not everyone is a "twisty" guy.
But I do agree that some of these kills are rediculous...