bluethunder
Well-Known Member
- Joined
- October 10, 2000
- Messages
- 107
- Reaction score
- 0
- City, State
- Raleigh, NC
- Year, Model & Trim Level
- 1996 XLT
i was wondering if anybody here has swapped a pre
95 manual T-case out of an old model explorer into
a late model. i was thinkning about doing this with
my 96, but im not sure if it will work. im sure i
could make it work but im not gonna do it unless its
a bolt in job, i know that all year explorers came with
the same BW transfer case, so i wont need to get an
adapter. my second question is totally
unrelated. i also wanted to know how to rig up my
lights from the roof rack. what power source should i
run them to? are the wires supplied long enough to
get to a suitable power source? any info you have on
either one of these topics would be greatly appreciated.
thanks.
95 manual T-case out of an old model explorer into
a late model. i was thinkning about doing this with
my 96, but im not sure if it will work. im sure i
could make it work but im not gonna do it unless its
a bolt in job, i know that all year explorers came with
the same BW transfer case, so i wont need to get an
adapter. my second question is totally
unrelated. i also wanted to know how to rig up my
lights from the roof rack. what power source should i
run them to? are the wires supplied long enough to
get to a suitable power source? any info you have on
either one of these topics would be greatly appreciated.
thanks.
